Mazak company rolls out Nexus series machine tool

  • Time:
  • Click:149
  • source:WINNERS CNC Machining
Mazak company is in the world ceaselessly the new idea machine tool that new development exhibits on exposition of each big machine tool and the new product that improve a composition, with establishing their good business image in manufacturing industry further, enlarge market share. On the EMO 2001, with " contact future 2001 " for the problem, introduced the new product that they produce in Fleornce manufactory, have machining center of two Integrex horizontal (E-410H and E-650H) , machining center of an Integrex vertical (E-1060H) . On the IMTS 2002, mazak company rolls out the includes center of two kinds of turning and two kinds of machining center Nexus series of new development. This series basically faces hope utmost ground to improve manufacturing efficiency, call in quickly the user such as workshop of the large production company that capital throws, production and contractor. This series products plan is advanced, reduce product part as far as possible to reduce expenditure, use our company advanced Palletech to make unit production, undertake real time produces monitoring in production treatment process, have treatment quality tall, handling time process of short, delivery mixes cycle of little, production less debug the advantage such as time weak point, because this is very fast occupational the market, favor by the user.  Nexus series includes QTNexus100, QTNexus200 center of two kinds of turning and VCNexus410A, VCNexus510A machining center of two kinds of vertical. The main characteristic of  QTNexus100: Machine tool equipment has 152.

4mm chuck; Equiped the main shaft electric machinery that power is 15 horsepower, main shaft is highest rotate speed is 6000r/min; The machine tool matchs stock to be able to install tool carrier of round of circumgyrate bosomy type of 12 cutting tool, the time that change a knife is 0.

2 seconds; Compare with congener product, acceleration rises 10% , cover an area of an area small 20% ; The machine tool can use MazakSuperQuickturn100 all cutting tool; To raise machine tool tigidity, designed the lathe bed with original structure, it is main shaft design into length 147.

The short form construction of 32mm, make machine tool stiffness rises 40% . The main characteristic of  QTNexus200: The machine tool equips 203.

2mm chuck, the biggest length that can machine a spare parts is 1021.

8mm; Equiped the main shaft electric machinery that power is 35 horsepower, main shaft is highest rotate speed is 5000r/min; The machine tool can use MazakSuperQuickturn200 all cutting tool; To raise machine tool tigidity, designed the lathe bed with original structure, it is main shaft design into length 266.

The short form construction of 7mm, make machine tool stiffness rises 40% . The main characteristic of  VCNexus410A: Machine the biggest range of the spare parts: X558.

8 × Y406.

4 × Z508(mm) ; Workbench area: 900 × 500(mm) , carrying capacity 500kg; The machine tool equiped the main shaft electric machinery that power is 25 horsepower, top rotate speed is main shaft 12000r/min, 15000r/min (optional) ; Fast feed speed is 36m/min; ATC can put store 30 taper are 40 cutting tool (80mm of the biggest diameter, 347mm of the biggest length) , the time that change a knife is to cut bits - cut bits for 2.

9 seconds, cutting tool - cutting tool is 1.

3 seconds. The main characteristic of  VCNexus510A: The biggest range that machines a spare parts is × of X1050 × Y500 Z500(mm) ; Workbench area is 1300 × 550(mm) , carrying capacity is 640kg; The machine tool equiped the main shaft electric machinery that power is 40 horsepower, main shaft is highest rotate speed is 25000r/min; Fast feed speed is 36m/min; ATC can be put store up 30 taper are 40 cutting tool (80mm of the biggest diameter, 347mm of the biggest length) ; The time that change a knife is to cut bits - cut bits for 2.

9 seconds, cutting tool - cutting tool is 1.

3 seconds.  CNC Milling